Solar Hybrid PV-Thermal Panel
Hot Air 
Solar Collector
SolarMaster SHA series of Hot Air solar collectors
are suitable for both residential and commercial applications.
FEATURES
SolarMaster SHA Hot Air Solar Collector is a revolutionary product which use the solar thermal energy for central heating, drying for agricultural products and foodstuffs, Industrial heating, school heating, house heating, etc. For both residential and commercial applications.  The design of the Hot Air Solar Collector is the first type in the World which produce hot air instead of normal hot water, with the following key features:
No water or liquid inside, no freeze, can work in cold area
Solar thermal energy directly change into hot air, heat efficiency
   up to 80%
1-2 Years investment back with small initial pay 
Extremely reliable design, endure high temp, no overheat
● Hot air with high temp. max to 200 C degrees
● Simple structure, less maintaining
● High wind load strength and High snow load strength
● Easy plug-in installation
 
PRODUCT DATA
 
 
Model SHA-50
Lenghth 3850mm
Width 2008mm
Peak Output * 3342 W / 11406 Btuh
Aperture Area 4.70 m2
Gross Area 7.86m2
Net Weight 170KGS
Hot Air Temp.
Max to 200 C degrees (Adjustable from 20-200C degrees)
Hot Air Volume
200m3/h
Air Blower Power
90W
 
*Calculated at midday (trans IAM = 1), G=1000W/m2, ∆T (tm-ta)=0, Location is in Jinxing, China
Hot Air Solar Collector 001
Hot Air Solar Collector 003
HOW IT WOKRS
Construction
The SHA solar collector is comprised of Three main parts:
 
● Solar Collector
Absorbs solar energy and converts it to usable heat.  Vacuum between the two glass layers insulates against heat loss. Distributing pipes are installed inside the vacuum glass tubes, to distribute the cold air into each glass tubes averagely, and been fully heated into hot air.
 
● Air Blower
90W special air blower for SHA solar collector which can produce hot air volume at 200m3/h.

● 
Smart controller
Extremely reliable designed controller can sense the air temp outside and inside the room, and control the hot air temp from 20-200C degrees. And automatically start and stop the system by setting.
Hot Air Solar Collector1
Main Component
 
Specifications
 
Component
Materials & Specifications
Evacuated Tubes
Material: Borosilicate 3.3
Tube style: Twin wall all glass
Dimensions: ∅58mm outer tube; ∅47mm inner tube;  1.8m length, 1.65mm outer tube wall thickness
Solar Absorber Coating
Material: Graded AL/N on AL
Absorptance: >92% (AM1.5);
Emittance: <8% (80C)
Vacuum: P<5×10-5 Pa;
Heat loss: <0.8W/(m2 C)
Distributing Pipe
Material: Borosilicate 3.3
Dimensions: ∅30mm outer tube; 1.65m length, 1.65mm outer tube wall thickness
Manifold Main Pipe
Material: Stainless steel 304-2B, thickness: 1.00mm
Mounting Frame
Material: Galvanized steel, 1.5mm thickness
Air Blower
Power: 90W, Air Volume: 200m3/h
Smart Controller
Sense the temp., and control the system automatically
 
APPLICATIONS
Our Hot Air Solar Collector can be used for multiply applications for both residential and commercial.
 
● House Air Heating
 
hvac2

● Tobacco Drying

 
farmer-smokes-cigarette-and-looks-footage-000848744_prevstill

● Foodstuffs Drying

 
webpage-seo

● Vegetable Drying

 
dried-tomatoes

● Public Buildings Air Heating

 
grand-central-station-in-new-york-14676504698CK

● School Air Heating

 
Students Listening To Female Teacher In Classroom

● Planting Air Heating

 
greenhouse-large
Contact Us Today, Get Max. to 50% Off !
请稍候